Luxor|H.Wilson WPS6HD - Manual (Page 2)

WPS6 Instruction Sheet
Do not completely tighten screws until step 5
H. Wilson Company
Address: 2245 Delany Rd.
Waukegan, IL
Phone: 800.245.7224
Fax: 800.245.8224
Email: [email protected]
web: www.hwilson.com
APRIL 2010 - REV00
Step 1: Using the large Allen wrench(P), install the base panel(M.)
to the legs(H) with 4 - M10x35 Allen screws(K) and nuts(L).
Install the Casters(N) and tighten with the caster wrench. Install
the cable grommet(I), and cover remaining holes with the small
grommets(Q) and sticker(R).
Casters w/ brake
towards the front
Holes face up
Flush side of leg
faces out
Grommet hole
Cable grommet
Step 2: Using the small Allen wrench(O),
install the middle shelf(F) with 4 - M6x35
Allen screws(G).
Straight back and
rounded front corners
Step 3: Using the small Allen wrench,
install the top(A) to the legs with 4 - small L brackets(B)
and 8 - M6x10 Allen screws(J).
Attach brackets to
top panel first
Step 4: Using the small Allen wrench,
install the back panel(E) to the legs with 8 - M6x10
Allen screws(J).
Cable pass-through
Position 1
Position 2
Step 5: Using the small Allen wrench,
install the adjustable shelf(C) to the
brackets(D) and legs with 8 - M6x10 Allen screws(J). Tighten all screws down.
Attach brackets to
adjustable shelf first