Luxor|H.Wilson WPS6HD - Manual (Page 4)

WPS6C Instruction Sheet
Do not completely tighten screws until step 5
H. Wilson Company
Address: 2245 Delany Rd.
Waukegan, IL
Phone: 800.245.7224
Fax: 800.245.8224
Email: [email protected]
web: www.hwilson.com
APRIL 2010 - REV00
Step 1: Using the large Allen wrench(X), install the base panel(N)
to the legs(G) with 4 - M10x35 screws(O) and nuts(P).
Install the Casters(Q) and tighten with the caster wrench.
Install the cable grommet(K). Step 1: Using a Phillips screw driver, install the magnetic catch(R) to the middle
shelf(F) with 2 - 1/2” wood screws(W). Install the metal strip(R) and cam lock(T)
with 4 - 1/2” wood screws to the door panel(M). Install the handle(U) with
the handle screws(V) to the door. Install the spindles(S) to the door.
Casters w/ brake
towards the front
Holes face up
Flush side of leg
faces out
Grommet hole
Cable grommet
Step 2: Using the small Allen wrench,
install the metal back panel(H) with the 8 - M6x10
Allen screws(E).
Step 3: Using the small Allen wrench,
install the top(A) to the legs with 4 - small L brackets(B)
and 8 - M6x10 Allen screws(E).
Attach brackets to
top panel first
Step 4: Install the left cabinet(J), right cabinet(L)
and door(M) panels. Using the small Allen wrench, install
the middle shelf(F) with 4 - M6x35 Allen screws(I).
Cable pass-through
Position 1
Position 2
Step 5: Using the small Allen wrench,
install the adjustable shelf(C) to the
brackets(D) and legs with 8 - M6x10 Allen screws(E).
Tighten all screws.
Attach brackets to
adjustable shelf first
Left panel slot faces up
Middle Shelf
Door Panel