Staub Electronics WPS-550-BUL-A WIREPATH - SURVEILLANCE 550-SERIES BULLET ANALOG OUTDOOR CAMERA WITH IR (600 TVL) - Manual (Page 23)

23
WPS-550-BUL-A Installation Manual
© 2013 Wirepath Surveillance
ID POS
Select the position for the CAMERA ID on the display screen by using
the left and right arrows “”, “” to move the ID.
LANGUAGE Setting
There are 2 language options: English and Chinese.
VERSION
Displays the factory firmware version.
RESET
If adjustment to the camera’s settings results
in poor picture quality, it is recommended
to restore the camera to factory default
settings. All configurations with the exception
of the COMM SETTINGS can be reset back
to factory default settings by selecting
FACTORY RESET and pressing the MENU
button. This option does not have an
"UNDO" feature, so ensure default settings
are desired before selecting this function.
EXIT
A. Select EXIT to exit the OSD menu.
B. Disconnect the OSD Joystick / BNC Test Adapter and replace the
plate removed in step 4-A.
RESET
FACTORY RESET
RETURN RET