Staub Electronics WPS-550-BUL-A WIREPATH - SURVEILLANCE 550-SERIES BULLET ANALOG OUTDOOR CAMERA WITH IR (600 TVL) - Manual (Page 8)

8
WPS-550-BUL-A Installation Manual
3. Mount the Camera
A. Mounting directly to a wall or eve:
A.1 - Use the Camera base as a template to mark the screw locations.
A.2 - Predrill holes in the marked locations.
A.3 - Connect the wires from the wall to the Cameras Pigtail and insert
them into wall.
A.4 - Position the Camera base over the marked holes from step 3-A.1.
A.5 - Secure the Camera with the provided screws.
B. Mounting to a Single gang Junction Box
We recommend the use of the WPS-MNT-FLUSH-BUL Flush Mount plate
when mounting to a single gang junction box. This plate is available in
gray or white to match the color of the Camera being used. Follow the
instructions in the WPS-MNT-FLUSH-BUL manual for using this mounting
method and then proceed to step 4.