Driver side mounting bracket installation shown) – Steelcraft Automotive 70380 SPORT BAR User Manual
Page 2
Advertising
9. Level and adjust Sport Bar properly; and then tighten all hardware at this time.
10.
Do periodic inspections to the installation to make sure that all hardware is secure and tight.
(Driver Side Mounting Bracket Installation Shown)
Page 2 of 3
8/9/07 (AM)
Remove these
two factory bolts
Loosen up this
factory bolt
Remove this
factory nut
Slide Mounting Bracket
between cross member bar
and radiator support bracket
Slide Mounting
Bracket between
motor mount bushing
Factory
hex nut
Factory
bolts
3/8” x 1” Self Tapping Bolt
Fig 1
Fig 2
Fig 3
Fig 4
23”
Cut an 1”
slot here
Advertising