Steelcraft Automotive 155090 RUNNING BOARD User Manual
Page 3
VIEWPOINT RUNNING BOARDS
2007-13 HONDA CRV
Page 3 of 7
9/14/12 (DP)
Front
Front
Front
Driver Side Installation Pictured Without Plastic Cover for Instruction Purposes Only
With the plastic cover in place, hold
the paper template (Driver side
pictured) over the (2) threaded holes
next to the pinch weld. Use a marker
to trace the square cut out section on
the template. Remove cover. Use a
utility knife or hacksaw to carefully
cut out this section. Check the
clearance between the Bracket and
the cover often for proper fit
(Fig 3) Driver side front mounting location pictured
(Fig 1) Driver side Template pictured
(Fig 2) Driver side Template pictured
(Fig 4) Front driver side location pictured
Cut out square and
(2) round holes
Fold up along
dashed line
(Fig 5) Dashed line represents driver side front
mounting location for Bracket assembly