Steelcraft Automotive 412420 4 OVAL SIDE BAR - Manual (Page 2)

4 ” OVAL STRAIGHT SIDEBARS
99-03, 04 HERITAGE FORD SUPER CAB F-150, F-250 LIGHT DUTY 4-DOOR
Page 2 of 3 7/16/12 Rev1(DP)
Hex Bolts, (4) 8mm Lock Washers and (4 8mm Flat Washers, (Figure 7). Do not tighten
hardware at this time.
6. Level and adjust the Sidebar and tighten all hardware at this time.
7. Repeat steps 2
– 6 for passenger Sidebar.
8. Do periodic inspections of the installation to make sure all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer
over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be
used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Front Bolt Plate Installation Example
Remove large oval rubber grommet
Slide Double Bolt Plate into opening
and pull back into position
Fig 1 Fig 2
Fig 3 Fig 4
Narrow Double Bolt Plate
with Plastic Retainers
(use for driver side rear 3-
door 97-98 only)