Steelcraft Automotive 32110 TAILLIGHT GUARD - Manual (Page 2)

For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Taillight Guard.
For gloss black finishes: Mild soap may be used to clean the Taillight Guard.
Page 2 of 1 1/16/08 (AM)
Rev A
Figure 1 Figure 2
Figure 3
Figure 4 Figure 5
Rubber Inserts
Adhesive
Foam Tape
Remove these
clips
(Rubber Inserts)
4mm x 40mm
Phillips Screws &
4mm Flat Washers