Teka DW9 59 S - Manual (Page 12)

User instructions
12
3.2 Washing programs
The dishwasher is equipped with a control panel an an 3-FIGURE
DISPLAY (12), described in chapter "3. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
PROGRAMMING
In this dishwasher model all the programming operations are possible
only with closed door.
A porta aperta suWith open door, on thel 3-FIGURE DISPLAY (12) will
appear the symbols
--- .
SELECTION PROGRAM
Keep pressing the PROGRAM SELECTION button (2) until the indicator
light corresponding (3) to the desired program illuminates.
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the START/PAUSE button (4) for a
few seconds, until the PROGRAM STARTED indicator light (5) stops
flashing. Now press the START/PAUSE button (4) again until “P0”
appears on the display (about 10 seconds).