Teka DW9 59 S - Manual (Page 14)

User instructions
14
SPREAD HALF LOAD
(available in all programs except the soak program)
When there are not many dishes to be watched, the “spread half load”
option, controlled by button (10) is useful; it saves water and electricity
and reduces the program’s duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load..
DELAYING THE PROGRAM
(available in all programs except the soak program)
The PROGRAM DELAY button (6) can be pressed to delay the start of
the washing program by up to 12 hours. This means that the dishwasher
can be operated at the time of day of your choice.
Press the PROGRAM DELAY button (6) again; the 3-FIGURE DISPLAY
(12) will show the number of hours of delay with which the appliance will
start.
After setting the delay, start the program: press the START/PAUSE
button (4) for a few seconds, until the PROGRAM STARTED light (5)
starts flashing.
The appliance will prewash the dishes, after which the “program delay”
set previously will come into effect.
To cancel the program delay once the wash has started, proceed as
follows:
• Press the START/PAUSE button (4) for a few seconds, until the
PROGRAM STARTED light (5) stops flashing;
• Press the PROGRAM DELAY button (6) several times until the
program delay returns to zero;
• Press the START/PAUSE button (4) to start the program.
NOTA: It is not possible to select the “delay program” when the program
have already began.