User instructions – Teka DW7 86 S User Manual
Page 5
19
1.2 Washing programs
The dishwasher is equipped with a control panel and an 3-FIGURE
DISPLAY (12), described in chapter "1. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.
Before starting a washing program make sure that:
x
The water supply tap is open.
x
The correct amount of detergent has been added to the
dispenser.
x
The baskets have been correctly loaded.
x
The spray arms are able to rotate freely and without
obstruction.
x
The dishwasher door is securely closed.
PROGRAMMING
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the 3-FIGURE DISPLAY (12)
will appear the symbols -- and the PILOT LIGHT PROGRAMS (3)
remains out.
SELECTION PROGRAM
Keep pressing the PROGRAM SELECTION button (2) until the indicator
light corresponding (3) to the desired program illuminates.
User instructions