Installing water filter – Teka NF2 650 X User Manual

Page 14

Advertising
background image

EN

13

3. 5 meter long water pipe (1/4 inch in

diameter)

4. Cold mains water valve with mesh

filter (Tap Adapter)

5. Water Filter to be fitted to the bracket

inside the fridge compartment.

Installing Water Filter

(in some models)
Installation Requirements

Two different water sources may be
connected to the refrigerator for water
supply: the mains cold water supply
and water in a jug.
A pump should be used for jug water
usage.

Check that the parts stated below are
supplied with your appliance.

1. Union for connection of the water

pipe to the rear of the appliance

2. 3 pieces of pipe clips (In case

required to secure the water pipe)

C

Note: Since the following parts are

not required in use with a jug, they
may not be found in the product you
purchased.

2

1

3

4

Advertising