Teka HPE 735 - Manual (Page 12)

23
E
N
G
L
IS
H
22
Switch off oven
Conventional
It is used for sponges and cakes where the
heat received must be uniform to achieve a
spongy texture.
Conventional with fan
Appropriate for roasts and cakes. The fan
spreads the heat uniformly inside the oven.
Grill
For preparing dishes with super ficial roasting.
It allows the outer layer to be browned without
af fecting the inside of the food. Ideal for flat
food, such as steaks, ribs, fish, toast.
MaxiGrill
Allows greater sur faces to be prepared, than
with the grill, together with higher power redu-
cing the time required for browning of the food.
MaxiGrill with fan
Allows uniform roasting at the same time as
sur face browning. Ideal for grills. Special for
large volume pieces, such as poultr y, game,
etc. It is recommended to put the item on a
rack with a tray beneath to collect the stock
and juices.
Caution
While using the Grill, MaxiGrill or MaxiGrill with
fan, the door must be kept closed.
Turbo
The fan distributes the heat coming from an
element located at the back of the oven. As a
result of the evenly distributed temperature,
food can be cooked on two levels at the same
time.
Lower Element with Turbo
Ideal for baking pizzas, pies, and fruit tar ts or
sponges.
Lower element
Heats only from beneath. Suitable for heating
dishes and raising pastr y and similar.
Defrosting
This cooking mode is suitable for gently defros-
ting of food. In special food to be consumed
unwarmed, e.g.: cream, custard, pastr y, tar ts,
cakes, fruit, etc.
Pyrolytic Function
This programme allows you to carr y out a
pyrolytic cleaning cycle which involves the oxi-
disation and carbonisation of grease accumu-
lated during cooking, through the high tempe-
ratures that are reached inside the oven.
During the cleaning cycle the light inside the
oven will remain of f.
NB
The light remains on through all cooking func-
tions except the pyrolytic function.
Oven Functions Use of the Oven
Setting the time on the Electronic Clock
When the oven is connected to the power sup-
ply, the word and the indication 00:00
flash on the display. Press or to set
the time on the clock. The clock beeps twice
to confirm the selected time.
If you wish to modify the time, press or
until the word and the current time
flash on the screen. Press . Then press
or to modify the time. The clock beeps
twice to confirm the modification.
Manual Operation
The oven is ready to be used when the clock
has been set. Select a cooking function and a
temperature.
When you begin cooking, symbol lights up
gradually until the oven heats up 100% to the
selected temperature.
Set the controls to to turn the oven of f.
Symbol gradually goes out as the tem-
perature inside the oven drops.
Functions of the Electronic Clock
Alarm: Creates an alarm signal when the
period of time finishes; the oven does not
need to be in use in order to use this function.
Cooking Time: To cook for a selected length
of time; the oven turns itself of f automatically
when the time finishes.
End Cooking Time: To cook until a set time;
the oven turns itself of f automatically when
the time finishes.
Cooking time and End Cooking Time: To cook
for a selected length of time and end at a set
time. When this function is set, the oven
comes on automatically at the time required
in order to cook for the set length of time
(Cooking time) and end automatically at the
indicated time (End Cooking Time)
Child Safety Function. This function blocks
the oven to prevent small children from inter-
fering with the controls.
Programming the Pyrolytic function
Programming the Alarm
1 Press until symbol lights up. Press
.
2 Set the period of time after which you wish
the alarm to sound by pressing or .
3 The clock beeps twice, the current time is
displayed and symbol lights up per-
manently to indicate that the alarm has
been set.
4 When the set period of time comes to an
end, the alarm sounds and symbol
star ts to flash.
5 Press any button to stop the alarm; symbol
goes out.
You can consult the remaining time at any
moment by pressing or until symbol
flashes and then pressing . You can
also modify the set time at this point by press-
ing or . The clock beeps twice to con-
firm the change.
If you wish the remaining time to be displayed
until the end of the set period of time, press
or until symbol flashes and then
press and keep it pressed in. Symbol
flashes and the word lights up.
Keep pressed in again to return to the
real time.
Setting the Cooking Time
1 Press or until symbol lights up.
Press .
2 Select the period of time you wish to cook
for by pressing or .
3 The clock beeps twice, the current time is
displayed and symbol lights up perma-
nently to indicate that the oven will turn
itself of f automatically.
4 Select a cooking function and temperature.