Teledyne LeCroy PXD Series User Manual
Page 9
901217-01
ISSUED: March 2003
5
CALIBRATION
The recommended calibration interval is one year. Calibration should be performed by qualified
personnel only.
ABNORMAL CONDITIONS
Operate the Digitizer only as intended by the manufacturer. If you suspect the Digitizer has been
impaired, remove it from the PXI Chassis and secure against any unintended operation. The Digi-
tizer is likely to be impaired, if for example, the instrument fails to perform the intended measure-
ments or shows visible damage.
CLEANING
Clean only the exterior of the Digitizer, using a damp, soft cloth. Do not use chemicals or abrasive
elements. Under no circumstances allow moisture to penetrate the instrument.
WARNING
Any use of the Digitizer in a manner not specified by the manufacturer may impair
the instrument and cause an unsafe condition to develop.
CAUTION
No operator serviceable parts inside. Refer servicing to qualified personnel.