Teledyne LeCroy PXA125 - Manual (Page 102)

User Manual PXA125
3-88 ArbConnection
delimited text). For additional information on files format, contact your
nearest LeCroy representative.
Save Waveform
The Save Waveform command will store your active waveform in your
PXA125 directory, as a binary file with a *.wvf extension. If this is the
first time you save your waveform, the Save Waveform As…
command will be invoked automatically, letting you select name,
location and format for your waveform file.
Save Waveform As…
Use the Save Waveform As… command the first time you save your
waveform. It will let you select name, location and format for your
waveform file. The Save As… dialog box is shown in Figure 3-21.
Figure 3-51. The FM Composer Save AS… Dialog Box
Exit
The Exit command ends the current FM Composer session and takes
you back to the Panels screen. If you made changes to your
waveform since it was last saved, make sure to Save your work
before you use this command.
Edit Commands The Edit commands are used for manipulating the waveform that is
drawn on the screen. The editing commands are explained in the
following paragraphs.
Autoline