Teledyne LeCroy WaveMaster 8000A - Manual (Page 9)

Getting Started Manual
WM-GS-E Rev E
7
WARNING
The WARNING sign indicates a potential hazard. It calls attention to a
procedure, practice or condition which, if not followed, could possibly cause
bodily injury or death. If a WARNING is indicated, do not proceed until its
conditions are fully understood and met.
CAT I
Installation (Overvoltage) Category rating per EN 61010-1 safety standard. It is
applicable to the oscilloscope front panel measuring terminals. CAT I rated
terminals must only be connected to source circuits in which measures are
taken to limit transient voltages to an appropriately low level.
Operating Environment
The X-Stream DSO is intended for indoor use
and should be operated in a clean, dry
environment with an ambient temperature
within the range of 5 °C to 40 °C.
WARNING
The DSO must not be operated in explosive,
dusty, or wet atmospheres.
Note: Direct sunlight, radiators, and other heat sources
should be taken into account when assessing the ambient
temperature.
CAUTION
Protect the DSO’s display touch screen from
excessive impacts with foreign objects.
CAUTION
Do not exceed the maximum specified front
panel measuring terminals (CH1, CH2, CH3,
CH4, AUX IN) voltage levels. Refer to
“Specifications” in the on-line Help manual for
more details.