Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 94)

Chapter Three Control Reference
PCIeCompliance1.1
PCIeCompliance2.0
RapidIOLPSerial
RapidIOParallel
SerialATA1.0a
SerialAttachedSCSI
STM16
STM1Optical
STM4Optical
STS1Eye
STS3
USB2.0
VSR5
XAUI
Sets/Queries value of signal bit rate. When the Signal Standard is set to Custom, this controls sets the
bit-rate value.
SignalBitRate
From 1000 to 5e+011 step 1000
Double
Range
Description
Starts an Find Bit-rate operation. This operation operates only on the first visible channel. If no
channels are visible, it operates on the first channel with sampling module.
FindBitRate Action
Description
Queries actual sampling rate of the CIS time base. The value reflects hardeware sampling rate.
CISStrobeFreq
From 1 to 100 step 1e-012
Double
Range
Description
This control is intended for internal use only. Do not use this control.
FPGAStatus
Register 16 bit
Register
Range
Description
916435 RevA 3-27