Teledyne LeCroy WaveRunner Automation Command - Manual (Page 449)

Automation Command and Query Reference Manual - Processor Reference
Hysteresis Double
From 0 to 10 step 0.1 Range
Hysteresis Double
TIE
app.Measure.Px.Operator (ParamEngine = "TIE")
TIE is "Time Interval Error", or the error in expected arrival time of trnasotions in either a data stream or a clock signal.
It is the heart of most jitter measurments (where only one signal is under analysis). The Skew processor is closely
related to this function in cases where measurements are using a separate reference clock.
WARNING: The TIE processor is appropriate for analysis of "real-time" acquired waveforms for jitter and timing
variations. It will give incorrect results for equivalent-time type waveforms.
Annotate Integer
From 1 to 10 step 1 Range
Annotate Integer
BaseFrequency Double
DataIsNRZ Bool
FindBaseFrequency Action
FindLevel Action
FrequencyMultiplier Double
Hysteresis Double
IncludeVirtualEdges Bool
IntervalsEdgeEdge Integer
IntervalType Enum
LevelType Enum
MaxComboIntervals Integer
PercentLevel Double
PermitGTHalfUI Bool
PLL1TransportDelay Double
PLLCompensateForMissingEdges Bool
PLLFrequency Double
PLLType Enum
SignalType Enum
Slope Enum
Summary String
UseAllEdges Bool
UseBaseFrequency Enum
UseMultiEdgeCombos Bool
UsePLL Bool
VirtEdgeType Enum
2-118
918500 RevA