Teledyne LeCroy Merlins Wand - CSL manual (CATC Scripting Language Manual) - Manual (Page 41)

35
CATC Scripting Language for Bluetooth Analyzers CATC Manual Ver. 1.21
result3 = NextNBits(2);
Trace ( "result1 = ", result1, "result2 = ", result2, "result3 = ",
result3 );
This will generate this Trace output:
result1 = C result2 = 7 result3 = 0
In the call to GetNBits : starting at bit 2, reads 4 bits (1100), and returns the value
0xC.
In the call to PeekNBits : starting at bit 6, reads 5 bits (00111), and returns the
value 0x7.
In the call to NextNBits : starting at bit 6, reads 2 bits (00), and returns the value
0x0.
NextNBits()
NextNBits (<bit_count integer>)
Return value
integer, list or raw.
Comments
Reads bit_count bits from the data source specified in the last call to
GetNBits , starting after the last bit that the previous call to GetNBits or
NextNBits returned. If called without a previous call to GetNBits , the result is
undefined. Note that bits are indexed starting at bit 0.
Example
raw = 'FOFO';# 1111000011110000 binary
result1 = GetNBits ( raw, 2, 4 );
result2 = NextNBits(5);
result3 = NextNBits(2);
Trace ( "result1 = ", result1, "result2 = ", result2, "result3 = ",
result3 );
This will generate this trace output:
result1 = C result2 = 7 result3 = 2
In the call to GetNBits : starting at bit 2, reads 4 bits (1100), and returns the value
0xC.
In the first call to NextNBits : starting at bit 6, reads 5 bits (00111), and returns
the value 0x7.
Parameter Meaning Default Value Comments
bit_count integer