Teledyne LeCroy Merlins Wand - CSL manual (CATC Scripting Language Manual) - Manual (Page 47)

41
CATC Scripting Language for Bluetooth Analyzers CATC Manual Ver. 1.21
The output of the example is:
AddDataCell()
AddDataCell(<data_value raw, list or integer>, <additional_info any>, ...)
Return value
None.
Comments
Creates an expandable/collapsible cell for viewing raw data such as data payloads.
Data can be raw bytes, an integer, or a list. If an integer is used, it will be interpreted
as 4 bytes of data. Specifying
_BYTES or _DWORDS in an additional_info
field will force data to be interpreted as bytes or quadlets. _COLLAPSED ,
_EXPANDED , _HIDDEN and _SHOWN are all interpreted the same is in a regular
AddCell call.
Example
# Creates a data cell with 2 dwords (32-bit integers) of data.
AddDataCell( '0123456789ABCDEF', _DWORDS );
# Creates a data cell with 4 bytes. Integer data values are always
interpreted as 32 bits of data.
AddDataCell( 0x11223344, _BYTES );
Figure 12-1: Example output for AddCell
Parameter Meaning Default Value Comments
data_value raw, list, or
integer
Interpreted the same way as GetNBits inter-
prets data_source
additional_info any Used to create special cells or to modify cell
attributes. Possible values are:
_BYTES
_COLLAPSED
_DWORDS
_EXPANDED
_HIDDEN
_SHOWN (default)