Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 110)

92
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.3.40 Write_Num_Broadcast_Retransmissions
A.3.41 Write_Page_Scan_Activity
A.3.42 Write_Page_Scan_Mode
A.3.43 Write_Page_Scan_Period_Mode
A.3.44 Write_Page_Timeout
Write_Page_Timeout command will write the value for the Page_Reply_Timeout
configuration parameter, which allows BTTrainer to define the amount of time a connection
request will wait for the remote device to respond before the local device returns a
connection failure.
Command Parameters Examples Comments
Retransmissions
Command Parameters Examples Comments
Page_Scan_Interval
Page_Scan_Window
Command Parameters Examples Comments
Page_Scan_Mode
Command Parameters Examples Comments
Page_Scan_Period_Mode 0x0001
Command Parameters Examples Comments
Timeout 0x10 0=Illegal Page Timeout. Must
be larger than 0
N = 0xXXXX Page Timeout
measured in Number of
Baseband slots.
Interval Length = N * 0.625
msec (1 Baseband slot)
Range for N: 0x0001 – 0xFFFF
Time Range: 0.625 msec -40.9
Seconds
Default: N = 0x2000 Time =
5.12 Sec