3 getuserdlglimit(), 4 setuserdlglimit(), Imit – Teledyne LeCroy SierraFC Verification Script Engine Reference Manual User Manual
Page 58
Verification Script Engine Reference Manual
53
24.3 GetUserDlgLimit()
This function returns the current limit of user dialogs allowed in the verification script. If the
script reaches this limit no user dialogs will be shown and script will not stop. By default this limit is set
to 20.
Format :
GetUserDlgLimit()
Example:
…
result = MsgBox( Format( "UserDlgLimit = %d", GetUserDlgLimit() ),
_MB_OKCANCEL | _MB_EXCLAMATION, "Some Title !!!" );
SetUserDlgLimit( 2 ); # set the limit to 2
…
24.4 SetUserDlgLimit()
This function sets the current limit of user dialogs allowed in the verification script. If the script
reaches this limit no user dialogs will be shown and script will not stop. By default this limit is set to 20.
Format :
SetUserDlgLimit()
Example:
…
result = MsgBox( Format( "UserDlgLimit = %d", GetUserDlgLimit() ),
_MB_OKCANCEL | _MB_EXCLAMATION, "Some Title !!!" );
SetUserDlgLimit( 2 ); # set the limit to 2
…