Teledyne LeCroy SierraFC Verification Script Engine Reference Manual - Manual (Page 25)

Verification Script Engine Reference Manual
20
10.7 SendAllChannels()
This function specifies that events occurred on ALL channels should be sent to the script.
Format :
SendAllChannels ()
Example:
…
SendAllChannels (); # - send events from ALL channels
10.8 SendTraceEvent ()
This function specifies the events to be sent to script.
Format :
SendTraceEvent( event )
Parameters: event – This parameter may be one of the following values:
Frame level events:
event value
Description
_DISCONNECT Disconnect ( FC link was disconnected )
_CONNECT Connect ( FC link was connected )
_FRM_PRIMITIVE Primitive frames
_FRM_FCP FCP frames
_FRM_GS FC-GS frames
_FRM_SW FC-SW frames
_FRM_DATA Data frames
Sequence level events:
event value
Description
_SEQ_FCP FCP sequences
_SEQ_GS FC-GS sequences
_SEQ_SW FC-SW sequences
_SEQ_OTHER Other kinds of FC sequences
Example:
…
SendTraceEvent( _FRM_FCP );
…
SendLevel( _SEQ );
SendTraceEvent ( _SEQ_FCP ); # - send FCP sequences