Teledyne LeCroy PCI Express 3.0 Mid-Bus Probe - Manual (Page 30)

Teledyne LeCroy PCIe 3.0 Mid-Bus Probe Installation Guide Version 1.2
30
9. Connect the other ends of the cable to the analyzer as follows: The “A” side of the cable
plugs into the Upstream 0-7 and the “B” side of the cable plugs into the Downstream 0-7
ports on the Summit Analyzer. If using two Gen3 Probe pods for x16 applications on a
Summit T3-16 Analyzer, connect the second probe pod using the Upstream 8-16 and
Downstream 8-16 ports on the Summit T3-16 Analyzer.