3 filter setup – Teledyne LeCroy Sierra M124 User Manual User Manual
Page 166
Advertising
Teledyne LeCroy
Navigation + View Toolbar
164
Sierra M124 SAS/SATA Protocol Analyzer User Manual
3.6.3
Filter Setup
To display the Filter setup dialog, click the
Filter button on the Viewer tool bar or
select View > Filtering.
Figure 3.82: SAS/SATA: Filter Setup Dialog
You can select or deselect each of the items shown in the Filter Options window for
filtering, by checking or unchecking a corresponding check box. Items not in the current
sample are in shade. See
“Selectable Filter Options for SAS” on page 167
Filter Options for SATA” on page 173
.
Note:
If you select a group, that also selects all child items.
Note:
Only packets captured at run time are available for selection for filtering.
Advertising