Teledyne LeCroy Sierra M124 User Manual - Manual (Page 370)

Teledyne LeCroy Display Options
368 Sierra M124 SAS/SATA Protocol Analyzer User Manual
To customize colors, use the Custom tab.
Figure 5.29: Custom Colors
Note: You cannot change the color of an Invalid Data (packet error) field. It is permanently set to red.
Formats Display Options
For each type of data in each group of data, the program has a default data format.
Examples of number data formats are Binary, Decimal, and Hexadecimal. An example of a
text data format is ASCII.
To specify a data format for an information type, in the Color/Format/Hiding tab, select a
row (such as Data) in the Group and Color column and expand it.
Select a data type in the Group.
Select a format in the Format section. The following formats are available:
Figure 5.30: Formats
If available, select Bit Order in the Format section. The options are MSB to LSB or LSB to
MSB.