Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 192)

Teledyne LeCroy Target and Device Emulation
190 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Figure 2.182: SAS: Open Frame Setting
Close Connection Definition
1. In the Close Connection pane, enter a value for the Erroneous Close Connection
Number and the Number of Errors in the corresponding text box.
2. Click the down arrow next to the Close Sequence Type drop down list box, then
choose a closing sequence.
3. For a delay in sending, click the Delay in Sending check box, click the down arrow on
the associated drop down list box, choose what to delay, and enter a value for the
Delay Time.
Figure 2.183: SAS: Delay in Sending
4. Click the down arrow on the ClOSE Primitive or DONE Primitive dropdown list box
in the Close Connection Settings dialog, then choose a Close or Done Primitive.
5. Enter a value in the CLOSE/BREAK Primitive Count text box.
2.6.4 SAS Commands Errors (SAS only)
Click the SAS Commands icon in the Errors window to display the
Commands Error Setting dialog.
Status
Indication