Setportspeedbyindex, Getportspeedbyindex – Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual User Manual
Page 664
Advertising
Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ITargetEmulEngine 664
SetPortSpeedByIndex
Void SetPortSpeedByIndex (
int
nDeviceIndex,
int
nPortIndex,
AnalyzerSpeedEnum eTargetSpeed);
Inputs
int
nDeviceIndex
This parameter indicates board index. This
parameter is set to zero if there is no cascading.
int
nPortIndex
This parameter specifies port index. Speed will
be set to this port index.
AnalyzerSpeedEnum eTargetSpeed
This parameter specifies port speed.
Return Value
None.
Remark
Sets port speed to selected board.
Advertising