Teledyne LeCroy Voyager Exerciser Generation Script Language Manual User Manual
Voyager™ usb 3.0 exerciser, Reference manual, Generation script language
Advertising
Table of contents
Document Outline
- Voyager™ USB 3.0 Exerciser
- Generation Script Language
- List of Instructions, Comments, Definitions, Directives, Operators, Parameters, Primitives, Procedures, and Settings
- 1 Introduction
- 2 Script Language Structure
- 3 Comments
- 4 File-Including Directives
- 5 Constant Declarations
- 6 Data Pattern Declarations
- 7 Global Generation Settings
- 7.1 Device Mode Settings
- 7.2 Link Configuration Settings
- 7.3 Link Delay Settings
- 7.4 Link Power Management Settings
- 7.5 LFPS Settings
- 7.6 Link Error Settings
- 7.7 Link Advertisement Error Injection Settings
- 7.8 Send Packet Error Retry Settings
- 7.9 Framing Error Settings
- 7.10 Script Parser Settings
- 7.11 Transaction Engine Settings
- 7.12 Device Emulation Settings
- 7.13 Generation Settings Syntax
- 7.14 Generation Settings outside Procedures
- 7.15 Generation Settings inside Procedures
- 7.16 Arithmetic Expressions in Constants
- 8 Packet and Structure Template Declarations
- 8.1 Predefined Packet/Structure Templates
- 8.2 Field Definitions
- 8.2.1 Defining a Field at a Specific Offset
- 8.2.2 Defining a Field at the Current Offset
- 8.2.3 Defining a Field with Variable Length
- 8.2.4 Defining a Default Field Value
- 8.2.5 Specifying Byte Order in Field Definitions
- 8.2.6 Using Byte Stream Literals in Field Assignments
- 8.2.7 List of Possible Field Values Attribute
- 8.2.8 Defining Subfields
- 8.3 Constants/Arithmetic Expressions in Template Declarations
- 8.4 Packet Template Inheritance
- 8.5 Packet Template Multi-byte Field Byte Order Attribute
- 8.6 Structure Declaration Examples
- 9 Generation Procedures
- 9.1 Transaction Engine Instructions
- 9.2 Device Emulation Instructions
- 9.3 Send Packet Instruction
- 9.4 Using Local Fields in Send Packet Instructions
- 9.5 Instruction Parameters
- 9.6 Structure Variable Syntax
- 9.7 Changing a Generation Setting
- 9.8 SetLinkState Instruction
- 9.9 TxSleep Instruction
- 9.10 SendFile Instruction
- 9.11 Wait Packet Instruction
- 9.12 Prepare Wait Packet Instruction
- 9.13 Wait Event Instruction
- 9.14 Loop Instruction
- 9.15 BreakLoop Instruction
- 9.16 Exit Instruction
- 9.17 Analyzer Control Instructions
- 10 Advanced Script Parser Features
- 10.1 Local Numeric Parser Variables
- 10.2 Local Structure Parser Variables
- 10.3 Using Local Fields in Structure Variables
- 10.4 Changing Structure Parser Variables
- 10.5 Sending Frames using Structure Variables
- 10.6 Using Special Data Pattern Creators in Field Assignments
- 10.7 Using Structure Variables to Assign Field Values
- 10.8 Using Multipliers to Assign Field Values
- 10.9 Using the Append Operator in Field Assignments
- 10.10 Initializing Struct Variables from Hex Streams
- 10.11 Sizeof Operators
- 10.12 Preprocessor Integer Arithmetic
- 10.13 Preprocessor If Operator
- 10.14 Preprocessor Loop Operators
- 10.15 Forward Declarations
- 10.16 RAND Token
- 10.17 RandStream( n ) Primitive
- 10.18 Global Numeric and Structure Variables
- 10.19 Using the Call Directive for Generation Procedure Insertions
- 10.20 Parser Tracing Functions
- 10.21 Name Aliasing
- 10.22 Include Path Directive
- 11 Appendix A – Generation Script Example
- 12 Appendix B - Raw Register Settings
- The following registers can be set using the SetRegister function:
- SetRegister(<register_address>, <value>)
- 12.1.1 SKP_TIMER
- 12.1.2 PM_ACCEPT_MODE
- 12.1.3 CORRUPT_LC
- 12.1.4 CORRUPT_LMP
- 12.1.5 CORRUPT_SHP_FRAMING
- 12.1.6 CORRUPT_SDP_FRAMING
- 12.1.7 CORRUPT_END_FRAMING
- 12.1.8 CORRUPT_SLC_FRAMING
- 12.1.9 DELAY_LAU
- 12.1.10 Insert K-Sym Error (LC and HP)
- 12.1.11 LTSSM_SETTING
- 12.1.12 LTSSM_U3EXIT_CONTROL
- 12.1.13 LTSSM_HOTRESET_TIME
- 12.1.14 LTSSM_RXDETECT_CONTROL
- 12.1.15 Generate LFPS Command
- 13 How to Contact Teledyne LeCroy