Terk TV42_OMЙ - Manual (Page 10)

9
Connecting the TV42
(continued)
C - Phase 2 Satellite Dish
1. Disconnect the satellite cables from the “OUTPUT” or “TO
RECEIVER” terminals on your multiswitch.
2. Connect the satellite cables to the OUT 1 and OUT 2 terminals
on the TV42 antenna. See Fig 14.
3. Using the 2 black 32” antenna cables, connect the IN 1 and IN 2
terminals of the TV42 to the “OUTPUT” or “TO RECEIVER”
terminals on your multiswitch.
See Fig 15.
4. Continue to “Installing the Indoor Diplexers.”
TV42
Fig 14.
Fig 15.