Terk TV42_OMЙ - Manual (Page 13)

12
Installing the indoor diplexers
1. Disconnect the satellite cable from the “SAT IN” terminal on
your satellite receiver. See Fig 18 .
2. Connect the satellite cable to the terminal marked “TV/SAT” on
the indoor diplexer. See Fig 19.
3. Connect one of the supplied white 12” connector cables from
the terminal labeled “SAT” on the inside diplexer to your
satellite receiver’s “SAT IN” terminal.
See Fig 19.
4. Connect the other white 12” connector cable from the terminal
labeled “TV” on the inside diplexer to your satellite receiver’s
“ANT IN” terminal.
See Fig 19.
5. Connect a coaxial cable (not supplied) from the satellite
receiver’s “TV OUT” terminal to your television or VCR. See Fig 19.
6. Repeat step for each satellite receiver.
7. Continue to “Setting up your TV”.
TV42
Satellite Receiver
OR
VCR,DVD, Video Games, etc
F
From Satellite Dish
Satellite Receiver
From Satellite Dish
Fig 18.
Fig 19.
Diplexer