TIF IR-1 Infrared Refrigerant Leak Detector - Manual (Page 2)

Product Description
The TIF No. IR-1 uses infrared optics to create a refrigerant leak
detector that combines sensitivity, speed, battery life, portability,
and ease of use. This unit detects leaks as small as 0.15 oz/year,
and meets both SAE J1627 and J2791 standards.
The IR-1 comes with a wall charger and a car charger for its
compact lithium-ion battery—which can power the leak detector
for up to eight hours of continuous operation before needing to
recharge. A choice of three sensitivity settings keep false alarms
to a minimum while allowing detection of even the smallest leak
in a refrigerant contaminated environment. A 30-second, self-
calibration test occurs whenever the unit is powered on to ensure
optimal performance. A built-in replaceable filter blocks moisture
and particulates, preventing damage to the sensor.
Specifications
Sensing element: enhanced infrared photo optics
Refrigerants: HFC, CFC, HCFC, and blends
Sensitivity level (per SAE J2791):
HIGH: 0.15 oz/year and higher
MED: 0.25 oz/year and higher
LOW: 0.5 oz/year and higher
Response time: less than one second
Battery life: up to 8 hours continuous use before recharge
Auto Off: 10 minutes of inactivity
Battery: 3.7V, 1800 mAH rechargeable, lithium-ion (No. TIFIR-9)
Low battery LED: illuminates when 1 hour of battery life remains
Charge time: less than 4 hours @ 300 mA
Operating environment: 32ºF (0°C) to 122ºF (50°C) at <75% RH
Storage environment: <80% RH for detector and battery
for 80% battery recovery:
-4ºF (-20°C) to 140ºF (60°C) less than 1 month
-4ºF (-20°C) to 113ºF (45°C) less than 3 months
-4ºF (-20°C) to 68ºF (20°C) less than 1 year
Accessories included: wall charger, car charger, storage case,
battery (installed), and operator’s manual.