TREND 963 Installation - Manual (Page 26)

Installation
2.16.2.3 Return to the Original 963 System
When you upgrade from an earlier version of 963, or 962 a backup of the system is made in a subdirectory of the
install directory called 963_backup, or 962_backup. This means that if you decide not to use the latest version of
963 it is possible to return to the original system.
To return to the original system:
1. Copy the entire contents of the backup directory Backups into the install directory, normally c:\program
files\trend control systems\963 or c:\program files\trend control systems\962.
2.17 Transfer the Licence to a Different Location
If you want to use your 963 licence to run 963 in a different location e.g. on a different PC, or in a different
directory, it is necessary to transfer the licence to that location.
To transfer the licence:
1. Install 963 in the new location as described in the 'Install the 963 Software' section of these instructions.
2. Run 963 in the new location.
3. Log in as someone with a PIN level of 99.
4. Press F1 to display the Information Centre.
5. Click . The Licence Editor dialogue box is displayed.
6. If transferring the licence to a different PC connect the removable media that is to be used to transfer the
licence.
Note that this has been tested on floppy disk, USB flash disk. Trend cannot guarantee that other removable
media type will work.
7. Click Register transfer. The Browse for Folder dialogue box is displayed.
963 Installation Instructions TG201026 Issue 09/01/2009 2 26