Vanguard ATRT-01_01B S3 - Manual (Page 38)

ATRT-01/01B S3 USER’S MANUAL REV 1
34
n. The following screen will be displayed:
Press the [2] key (NO).
o. The following screen will be displayed:
Press the
[1]
key (YES) to save the test record to the unit’s Flash EEPROM.
p. The test record will be saved and the following screen will be displayed:
NOTE
The unit will automatically assign the record number and will not over-write
existing test records.
Press any key to return to the “START-UP” menu.
RECORD NUMBER 2
HAS BEEN SAVED!
SAVE THIS RECORD?
1. YES
2. NO
RUN ANOTHER TEST?
1. YES
2. NO
3. REPEAT PREV. TEST