Vestil BT (20, 40, & 60) - Manual (Page 12)

change that alters the tongs from normal operating condition, like bending the structural members.
NEVER modify the tongs without the express, written approval of Vestil. Modifications may
render the tongs unsafe to use.
DO NOT use the tongs if adjustments and/or repairs are incomplete! Return the tongs to service
ONLY after finishing all necessary repairs and/or adjustments.
Step 5: Install the replacement parts.
ASME B30.20 requires special markings for all repaired or modified lifters (beam tongs).
Consult the standard and affix/attach the necessary marking(s).
Step 6: After the tongs have been repaired, conduct a periodic inspection. The tongs may be returned to
service ONLY IF they pass the inspection. Repeat steps 3-5 if the inspection reveals additional safety
issues.
Step 7: Make a dated record of the repairs, adjustments and/or replacements made.
Markings:
Only use the tongs if ALL labels are readable and undamaged. Contact Vestil for replacement labels.
FIG. 2: Product label placement
Manufacturer’s
Name Label
“Made in USA”
- 12 -