Vestil CBS Series - Manual (Page 9)

06/08 21-126-122
V ESTIL M FG . C O . 9
H YDRAULIC D IAGRAM – L IFT -H OLD -L OWER CIRCUITS
o
Warning: Care should be taken to identify all potential hazards and comply with applicable safety procedures
before beginning work. Fully lower the forks and ensure that all system pressure and power have been removed
before attempting to work on the electrical or hydraulic systems.
o
Only qualified individuals trained to understand mechanical devices and their associated electrical and hydraulic
circuits should attempt troubleshooting and repair of this equipment
o
Caution: Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use an anti-wear hydraulic
oil with a viscosity of 150 SUS at 100°F (ISO 32 @ 40°C), or non-synthetic transmission fluid.