Vestil LAD-MM User Manual
Page 10
4
Outside Edge
2-1/4inch Bolt
Inside Edge
5/16in.
Lock Nut
Instruction 4: Attach the step weldment (1) to the back leg weldment (2) with 1-1/2in. bolts. Position
the steps face down so that the free end of the platform projects upwards from the ground.
Platform
5/16in.
Lock Nut
1-1/2in.
2
1
Instruction 5: Rotate the ladder so that either the left or right side rests on the ground. Connect a
horizontal brace (3) to the side of the back leg weldment (2) in contact with the ground, using a 2-1/4in. bolt
(D) and a 5/16in. lock nut. Tighten a nut onto the bolt with your fingers. Use 5/16in. crescent wrenches to
tighten the connection, but leave enough play in the connection to later connect the opposite end of the
base support to the stair frame bracket
2
2-1/4in. Bolt
1
Base Support
- 10 -