Vestil LLW-PAILD-200 - Manual (Page 4)

01/06 42-126-120
V ESTIL M FG . C O . 4
R OUTINE M AINTENANCE & S AFETY C HECKS – LLW-PAILD-200
o
Warning: Care should be taken to identify all potential hazards and comply with applicable safety procedures
before beginning work.
o
Only qualified individuals trained to understand mechanical devices should attempt troubleshooting and repair of
this equipment
(A) Inspect daily for:
1.) Broken strands, fraying or kinking of the lifting cable.
2.) Damage or structural deformation to the structural members.
3.) Unusual noise or binding, or evidence thereof.
(B) Inspect monthly for:
1.) Worn or damaged lifting cable.
2.) Pivot point wear of the pail carrier.
3.) Pail carrier saddle strap looseness and/or wear.
4.) Integrity of the retaining hardware on all rollers and on all pivot point pins.
5.) Looseness, wear, or damage to the casters’ bearings, mounting hardware, or surface material.
6.) Unusual noises or movement during operation.
7.) All the information/safety/warning labels being in place and in good condition.
8.) The need to clean off dirt and debris.
B
ILL OF
M
ATERIALS
-- LLW-PAILD-220
Item #: Description Part number Qty.
1 Weldment, frame sub-assembly 21-514-005 1
2 Sub-assembly, deck 42-538-004 1
3 Roller, with bushing 21-527-002 2
4 Pulley, with bushing 21-527-001 1
5 Washer, flat, 9 /
16
” ID A/L 4
6 Pin, clevis, ½”Ø x 1¾” long 21-112-003 3
7 Pin, cotter, 1 /
8
” x 1” long A/L 3
8 Wheel, MR-6/2-RB 16-132-058 2
9 Retaining ring, external, for ¾” ID pin 15-117-002 2
10 Washer, flat, ½” ID A/L 4
11 Nut, hex, 3 /
8
”-16 UNC A/L 5
12 HHCS, 3 /
8
”-16 UNC x 1¼” A/L 5
13 Washer, lock, 3/8” ID A/L 5
14 Cable, aircraft, 3 /
16
” A/L 1
15 Thimble, cable, 3 /
16
” A/L 1
16 Anchor, cable A/L 1
17 Stiffener, bar 21-017-016 1
18 Pin, roller, ½”Ø HR x 1 13 /
16
” long 21-112-002 4
19 Roller, guide (1 3 /
8
” OD x ½” ID x .35” thick 21-027-003 8
20 Winch (Dutton-Lainson DLB 800) 21-042-002 1
21 Wheel, HR-4/1.25-SLB 16-132-009 2
22 Bolt, hex head, 3/8”-16 UNC x 2½” long A/L 2
23 Nut, hex, nylock, 3 /
8
”-16 UNC A/L 2