Vestil PG series - Manual (Page 15)

(Continued from previous page)
structural members or removing the pipe guide weldments. NEVER modify the pipe grab without the
express, written approval of Vestil. Modifications may render the pipe grab unsafe to use.
DO NOT use the pipe grab if adjustments and/or repairs are incomplete! Return the grab to service
ONLY after finishing all necessary repairs and/or adjustments.
Step 5: Perform a periodic inspection, as recommended in ASME B30.20.
Step 6: Make a dated record of the repairs, adjustments and/or replacements made.
Product Labeling:
Only use the pipe grab if ALL of the labels are readable and undamaged. Contact Vestil for replacement
labels.
FIG. 3: Product safety label placement
- 15 -
“Made in
USA”
label
“Made in
USA”
label
Manufacturer’s
Name label
Maximum
Capacity
label