Vestil SBM series User Manual
Page 2
2
INSTALLATION (AND/OR ASSEMBLY) INSTRUCTIONS
REVIEW THIS ENTIRE PAGE BEFORE INSTALLING THE SBM.
Consult the factory in the event there are any questions or problems at the time of installation, or for
information regarding optional features not covered by the owner’s manual.
The installation must be made so that it complies with all the regulations applicable to the machine and
its location. The end-user must verify that the supplied equipment is installed so it will be suited to the
environment in which it will be used.
CONSULT OSHA 1910.179 AND ASME B30.17 FOR THE OWNER’S / USER’S RESPONSIBILITIES
REGARDING THE OPERATION, CARE, AND MAINTENANCE OF THIS MACHINE.
ENSURE THAT ALL EMPLOYEES INVOLVED IN THE OPERATION OF THIS SBM UNDERSTAND
AND FOLLOW THESE INSTRUCTIONS!
The standard model SBM is suitable to be used in most non-classified locations. It is intended to be
used to lift and transport stable, evenly-distributed, non-hazardous materials loads and / or containers.
LOADING:
The load rating, in pounds, is shown on the machine dataplate located on the main body of the unit. It
indicates the net capacity of the SBM with a static load that is centered and evenly distributed on the
platform.
Do not exceed a rate of two feet per second when moving loads across the platform.
WARNING:
Do not exceed the SBM’s load ratings. Injury to personnel or permanent damage to the
SBM could result from exceeding the listed capacity.
OPERATION:
Inspect all hooks, shackles, bails and retaining pins daily.
WARNING:
Keep all personnel clear of the machine when it is in operation. Be certain no part of any
person or object is under any part of the SBM before lowering the unit.
CAUTION:
Always carefully watch the SBM and any load on it when it is in operation / motion.
CAUTION:
Never use the SBM if any damage or unusual noise is observed, if it is in need of repairs, or
if it seems to be malfunctioning. Notify your supervisor or maintenance personnel if you notice anything
out of the ordinary.
Ensure that all information / safety / warning labels stay in place and are legible. Refer to the labels
page in this manual.
OPERATION INSTRUCTIONS