Vestil SLG-6 & SLG-10 - Manual (Page 12)

Copyright 2012 Vestil Manufacturing Corp. Page 12 of 12
Alternative Door Installation
Flip the door over and position it in the door frame as desired. Align the frame wing of each hinge with the door jamb
(41A) and drill holes in the jamb that match the holes in the wings. Before fastening the door to the jamb, tap the
hinge pins out of the hinge knuckle and reinsert them from the top; then fasten the frame wings of the hinges to the
door jamb with 10mm screws or 4mm x 10mm rivets. Fasten the latch keep to the (opposite) door jamb (41B) with
either 10mm screws of 3mm x 10mm rivets.
Remove hinge pin and reinsert
it from the top
41B
71
71
41B