Vestil SLG-6 & SLG-10 - Manual (Page 2)

Copyright 2012 Vestil Manufacturing Corp. Page 2 of 12
P
RODUCT
I
NTRODUCTION
Thank you for purchasing a SHED-5932-F model Steel Storage Shed. Each shed
includes the following features: panels protected from rust by zinc-plating; angled roofline
to prevent rain accumulation on the roof; lockable door latch that incorporates a 5/16in.
opening for a padlock (not included); and an open-floor design. Although assembly and
use are relatively intuitive, all persons who might participate in the assembly or use of this
product must familiarize themselves with the instructions provided in this manual.
Additional shed specifications appear in the table below:
Product Name
Overall Dimensions Height x Width x
Depth in inches (metric equivalents) Door Opening Dimensions Height x
Width in Inches (metric equivalents) Net Weight in
Pounds (kg)
SHED-5932-F
59 x 32 x 78¾
(149.9cm x 81.3cm x 200cm)
72½ x 30½
(184.2cm x 77.5cm)
88
(~40kg)
S AFETY P RINCIPLES
Vestil Manufacturing Corp. recognizes the critical importance of workplace safety. Employers are
responsible for instructing employees to assemble and use the product properly. Employees and any
other person, who participates in the assembly of this product or uses the shed must read and
understand every instruction BEFORE assembling or using it. If you do not understand an instruction,
ask your supervisor or employer for clarification.
Although Vestil diligently strives to identify foreseeable hazardous situations that might arise during the
course of assembly or use, this manual cannot address every conceivable danger. The end-user must exercise
sound judgment at all times. Vestil is not liable for any injury or property damage that occurs as a consequence
of failing to apply the assembly or use instructions that appear in this manual.
This manual classifies personal injury risks and situations that could lead to property damage with SIGNAL
WORDS. These signal words announce an associated safety message. The reader must understand that the
signal word chosen indicates the seriousness of the described hazard.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the shed.
S AFETY G UIDELINES
Failure to read and understand the instructions included in this manual before assembling or using the
shed constitutes misuse of the product.
Electrocution might result if the shed contacts electrified wires. Reduce the likelihood of
electrocution by applying common sense.
 DO NOT assemble or install the shed in an area where contact with electrified wires is possible.
 DO NOT use the shed as a shelter during electrical storms.
Reduce the likelihood of serious personal injuries that could result from improper of careless
assembly or use of this product:

DO NOT use a structurally damaged shed. Periodically inspect the shed for damage. DO NOT use the shed if it is
structurally damaged.
 Follow the assembly instructions in this manual; the shed might be unsafe to use if improperly or carelessly
assembled.

DO NOT stack items on top of the shed. The roof panel will not support much weight, and because the roof is angled,
items will slide off of the roof.

DO NOT climb on or allow others to climb on the shed.