Vestil SL-xxx-AA - Manual (Page 15)

15
Operation
Lifting the load
CAUTION!
Before lifting a load to be transported, ensure that the load does not
exceed carrying capacity of the stacker.
The nominal carrying capacity and lifting heights can be viewed in the
load diagram.
Ensure that the load can be lifted up in a compact and stable manner.
Slipping or falling of the load must be avoided.
Load must not project into the lifting frame.
Load must be centered and evenly distributed on the forks.
The load must not extend more than 2” over the end of the forks.
Transporting the load
CAUTION!
Raise the load slightly (3”) above the ground to transport
For safety reasons (view) transport only in a forward direction
Only when lifting or lowering down the load it is permissible to move the
stacker forward or in reverse with a raised load
Lift up or lower down the loads on level surface
When unloaded, move stacker only with forks lowered.
When stacker not in use
Park the stacker on a level surface
Lower down the forks completely
Push down ON/OFF switch