Vestil WL-100 series - Manual (Page 15)

15
SAFETY LABEL IDENTIFICATION
MAKE SURE ALL WARNING LABELS ARE IN PLACE!
* Product safety signs or labels should be periodically inspected and cleaned by the product users as necessary to
maintain good legibility for safe viewing distance — ANSI 535.4 (10.21). Contact the manufacturer for replacement
labels.
*Product safety signs or labels should be
periodically inspected and cleaned by the
product users as necessary to maintain
good legibility for safe viewing distance ...
ANSI 535.4 (10.21)
Contact manufacturer for replacement
labels.
1
DANGER
!
TO MAXIMIZE SAFETY READ OWNER'S MANUAL
BEFORE OPERATING OR REPAIRING THIS EQUIPMENT.
NEVER WORK UNDER LOADED DECK. ALWAYS PLACE
MAINTENANCE BARS IN LOCKED POSITION AS SHOWN
IN THE OWNERS MANUAL BEFORE WORKING UNDER
THE DECK.
KEEP CLEAR OF MOVING SCISSOR LEG MECHANISM.
DO NOT PULL HANDS, FEET OR OBJECTS UNDER
DECK.
ALL LOADS MUST BE CENTERED ON DECK.
SCISSOR DOCK & POWER UNIT MUST BE WIRED &
GROUNDED ACCORDING TO LOCAL & NATIONAL
ELECTRICAL CODES.
DO NOT EXCEED CAPACITY RATINGS BELOW.
UNIFORMLY LOADED LIFT CAPACITY
AXLE CAPACITY OVER SIDES
AXLE CAPACITY OVER ENDS
MODEL NO. SERIAL NO.
OPERATION: DEPRESS "UP" BUTTON TO RAISE DECK. RELEASE BUTTON TO STOP
DECK. DEPRESS "DOWN" BUTTON TO LOWER DECK. RELEASE BUTTON TO STOP DECK.
OIL RECOMMENDATION: USE ISO AW-32 HYDRAULIC OIL OR EQUIVALENT FOR
TEMPERATURE RANGE OF 0° TO 120°.
VESTIL MANUFACTURING COMPANY ANGOLA, INDIANA 46703 - (260)665-7586
1