VIAIR 95C - Manual (Page 4)

OPERATING INSTRUCTIONS
1. IMPORTANT: Always operate the compressor at or below the MAXIMUM PRESSURE RATING of
the compressor. Please refer to Application & Specifications Sections of this manual for details.
2. Always observe the MAXIMUM DUTY CYCLE of the air compressor. Refer to Compressor
Applications and Specifications Sections of this manual for details. Operation exceeding
maximum pressure ratings and/or duty cycle will result in damage to the air compressor.
3. To prevent discharge of your vehicle’s battery, and enhance performance, ALWAYS keep the
vehicle’s engine running while using the compressor.
MAINTENANCE & REPAIRS
1. Periodically check all electrical and fitting connections. Clean and tighten as needed.
2. Periodically check all mounting screws. Tighten as needed.
3. (P/N 00092 Only) Replace air filter element periodically. Replacement frequency depends on
operating frequency and operating environment. For frequent use in dusty environments,
we recommend that you replace air filter element at least once a month.
4. Regularly clean dust and dirt from compressor cooling fins and motor housing.
5. Your air compressor is equipped with permanently lubricated, maintenance-free motor.
Never try to lubricate compressor.
6. All repairs should be performed by Manufacturer or Manufacturer’s Authorized Service
Agencies only.
CAUTION:
Never touch the air compressor or fittings connected to the air compressor with bare hands
during or immediately after use. Leader hose and fittings connected to Leader Hose will become
very hot during and after use. If necessary, wear heat resistant gloves to handle fittings, air line,
and leader hose.
PLEASE NOTE:
Use thread sealant for proper installation. Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8” NPT fittings is 10 to 11 ft. lbs.
USER MANUAL
90C - 92C - 95C Air Compressor Kit