AMX NXD-CV7 - Manual (Page 112)

Firmware Pages and Descriptions
104 7" Modero Widescreen Touch Panels
7. Set the Minimum Dimmer Brightness (Dim Mode Min Level) to a comfortable level by sitting
in front of the panel. You should be able to comfortably see someone sitting behind the panel
without being “blinded” by the panel.
8. Move around the panel and block the direct or indirect light from the room fixtures with your
body. Take note of the drop in the lighting level being detected by the panel in response to your
movements.
9. Set the Minimum brightness of the Dimmer (Dim Mode Max Level) below the detected drop.
This will make sure that the panel does not react to variations in the lighting conditions of a
normal working environment.
Password Setup Page
The Password Setup page (FIG. 91) centers around the properties used to assign passwords for the
Modero panel pages.
The elements of the Password Setup page are described in the table below:
The minimum (lower level) of the dimmer should be at least 10% lower than the
minimum detected level (ex: lower dimmer level at 30% if the detected lighting of the
room is at 40%).
FIG. 91 Password Setup page
Password Setup Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
In Panel Password
Change: Accesses the alphanumeric values associated to particular password sets.
• PASSWORD 1, 2, 3, 4, 5 (protected) buttons open a keyboard where you can
enter alphanumeric values associated to a selected password group.
• Clearing Password #5 removes the need to enter a password before
accessing the Protected Setup page.