AMX NXD-CV7 - Manual (Page 16)

CV7 Touch Panel Accessories
8 7" Modero Widescreen Touch Panels
Installing the NXA-AVB/ETHERNET
A PSN power supply can indirectly provide power to a Modero panel by routing power through the
NXA-AVB/ETHERNET Breakout Box. FIG. 5 shows a sample wiring configuration using both an
indirect or direct PSN power connection for a video-capable Modero panel.
A PSN power supply can also directly provide power through the unit to a target Modero panel.
FIG. 6 shows a sample wiring configuration for a non-video capable Modero panel.
NXA-AVB/ETHERNET Specifications (Cont.)
Rear Components: • 6-pin 3.5 mm Phoenix connector for in-bound (left/right channel) audio
• 4-pin 3.5 mm Phoenix connector for out-bound (from microphone) audio
• BNC connector (female) for Composite or Chroma (for video-capable
panels only)
• BNC connector (female) for luminance (for video-capable panels only)
• RJ-45 connector for Ethernet input from the control system
• 2-pin 3.5 mm Phoenix connector for in-bound power
Included Accessories: • Two 2-pin Phoenix connectors (41-5025)
• 4-pin Phoenix connector (41-5047)
• 6-pin Phoenix connector (41-5063)
• Rack Mount Kit (KA2250-40) with mounting bracket (62-2254-02)
Optional Accessories: • AC-RK Accessory RackMount Kit (FG515)
• Modero Table Top Cable (CA2250-50)
• PSN4.4 power supply (FG423-45) (panel dependant)
• PSN6.5 power supply (FG423-41) (panel dependant)
FIG. 5 Sample wiring configuration on video-capable panels using this breakout box
NXD/T Video-capable
Ethernet In
PSN power
(RJ-45)
Video In
(BNC)
Mic Out
(4-pin captive-wire)
Audio In
(6-pin captive-wire)
NXA-AVB/ETHERNET
PSN
supplied via
NXA-AVB box
Audio/Video
(CAT5)
Line Level out
(to amplifier
or VOL card)
Touch Panels
or
Direct
Connect
Breakout Box
Ethernet
(rear)
(front)
(CAT5)
supply
Indirect
Connect
PSN power
supply