1 product errata, 1product errata – AMD Athlon 6 User Manual
Page 5
5
24332G—October 2003
AMD Athlon™ Processor Model 6 Revision Guide
Preliminary Information
1
Product Errata
This section documents AMD Athlon™ Processor Model 6 product errata. The errata are divided into
categories to assist referencing particular errata. A unique tracking number for each erratum has been
assigned within this document for user convenience in tracking the errata within specific revision
levels. Table 1 cross-references the revisions of the processor to each erratum. An “X” indicates that
the erratum applies to the stepping. The absence of an “X” indicates that the erratum does not apply
to the stepping. Table 2 on page 6 cross-references erratum to each processor segment. An “X”
indicates that the erratum applies to the processor segment.
Note:
There can be missing errata numbers. Errata that have been resolved from early revisions of the
processor have been deleted, and errata that have been reconsidered may have been deleted or
renumbered.
Table 1.
Cross-Reference of Product Revision to Errata
Errata Numbers and Description
Revision
Numbers
A0
A2
A5
16 INVLPG Instruction Does Not Flush Entire Four-Megabyte Page Properly with
X
X
17 Deadlock May Occur in a Two-Processor System in the Presence of Probe to
X
X
X
18 Processor May Issue Non-Connect Bus Cycle After FID Special Cycle
X
X
19 Processor Does Not Support Reliable Microcode Patch Mechanism
X
20 Processor Performance Counters Do Not Count Some x86 Instructions
X
X
X
21 A Speculative SMC Store Followed by an Actual SMC Store May Cause One-
X
X
X
22 Real Mode RDPMC with Illegal ECX May Cause Unpredictable Operation
X
X
X
23 Using Task Gates With Breakpoints Enabled May Cause Unexpected Faults
X
X
X
24 Single Step Across I/O SMI Skips One Debug Trap
X
X
X
25 Software Prefetches May Report A Page Fault
X
X
X