Warner Electric 5162-101-002 Conduit Box Kit - Manual (Page 2)

2 Warner Electric • 800-825-9050 P-1402 • 819-0526
Failure to follow these
instructions may result in product damage,
equipment damage, and serious or fatal
injury to personnel.
Parts List for kit 5162-101-002
Item Quantity Part Name
1
1 Box, Conduit
2 1 Plug, Protective
3 1 Retainer, Wire
4 1 Screw, Hex, Washer Head
4-1 1 Terminal Ring
5 1 Cover Assembly
6 1 Screw, Hex, Washer Head
7 2 Wire Nuts
8 1 Plug, Protective
9 2 Screw, Hex. Head
9-1 2 Washer, Lock
7
1
2
4
4-1 9
9-1
6
5
8
3
Components
Note: Item 3 is supplied with the clutch or brake.
Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Components. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical Connections. . . . . . . . . . . . . . . . . . . . 4
Warranty . . . . . . . . . . . . . . . . . . . . . . Back Page
Introduction
Conduit Box Kit No. 5162-101-102 contains all
components needed to assemble a conduit box
for Warner Electric AT clutches and brakes, sizes
25 through 115. Wiring terminations are provided.
Consult local electrical codes for proper wiring
terminations required.
For AT Series Clutches and Brakes
This Warner Electric conduit box is designed to
provide a proper means for field wiring termination
and power entry into Warner Electric AT
(Advanced Technology) series clutches and
brakes. It conforms to the requirements of
Underwriters Laboratories. Kit No. 5162-101-002,
contains all components needed to assemble a
conduit box for Warner Electric AT clutches and
brakes, sizes 25 through 115. Please follow these
instructions carefully when installing this conduit
box.
Do not connect rigid conduit
directly to the conduit box. A minimum of 12”
of flexible liquid tight conduit or other
suitable flexible wiring with appropriate
fittings is required. Flexible wiring is required
to prevent side loading of bearing mounted
clutches and possible deformation of the
conduit box or components during assembly.