Warner Electric Gen 2 Enclosed Module Option - Manual (Page 2)

2 Warner Electric • 800-825-9050 P-273-6 • 819-0536
Using the tab between the gasket windows as a
guide, center and press the window perimeters
onto the front edge of the cover. (See Figure 3)
Peel off the remainder of the gasket backing and
press the entire gasket on so it conforms to the
inside of the cover. (See Figure 4)
Apply the adhesive backed gaskets to the vent
covers as follows:
Peel away half of the gasket backing paper, past
the windows and screw holes. (See Figure 1)
Starting at the screw holes and working outward,
press the gasket onto the cover with the gasket
window edges against the 90° bend of the cover.
(See Figure 2)
Figure 1 Figure 3
Figure 4
Figure 2
Window Edges
against 90° bend